H-100 Penetrating non-film water repellent

Product features:

• Deeply penetrate cement and inorganic material surfaces (such as stone, brick, etc.) to form a non-film waterproof layer

• Reacts with moisture in the air to produce a highly weather-resistant, durable, and water-resistant water repellent layer

• Colorless, odorless, non-film-free, does not change the original appearance of the material

• The water repellent effect is long-lasting and stable, effectively preventing water vapor infiltration and salt corrosion

Scope of application:

• Salt damage prevention for structures such as harbor facilities, coastal roads, bridge piers, etc.

• Prevent weathering of cement structures in general buildings

• Reduce water absorption and prevent white hua in tile joints, stones, red bricks, roof tiles, etc.

Construction method:

1. Clean the construction surface (remove dirt, grease, dust)

2. Use clean and completely dry tools for construction

3. Apply two coats: Apply the second coat immediately after the first coat is half dry, and the drying time is about 4-5 hours

4. Note that some inferior tile caulking materials may cause color changes

Usage precautions:

• During construction, be careful to avoid spraying on glass

• Do not add solvents arbitrarily to avoid affecting the waterproof performance

• Avoid construction when the temperature is higher than 40℃ or before and after rain

• Please store the product in a dry and cool place to avoid sunlight and moisture

• After construction, please immediately clean the wet paint on the tool with a dry cloth

Reference for usage:

• Every 0.5 kg can be applied to about 1 square meter (stone, cement surface)

Packing specifications:

• 18 kg/barrel