High adhesion interface(tile type)
Model :
PR-703
│Main Ingredients│Denaturing Acrylic Resin
│ Scope of application │ PR-703 (tile type) is used as an interface between a material such as glass, tile, etc. and a new adhesive material to increase adhesion.
│How to use │High adhesion interface material (this is the primer layer), 702 (1:3~4 diluted with water), 703, 705 (1:30~40% diluted with water).
│Coating method│Spray, brush, roller or airless paint sprayer
│ Drying time │ about half an hour outdoors, about 1 hour indoors
│Theoretical coating amount │80-90 m ^ 2 / 5 gallons. 1 road
│ Capacity │ 5 gallons
│ Scope of application │ PR-703 (tile type) is used as an interface between a material such as glass, tile, etc. and a new adhesive material to increase adhesion.
│How to use │High adhesion interface material (this is the primer layer), 702 (1:3~4 diluted with water), 703, 705 (1:30~40% diluted with water).
│Coating method│Spray, brush, roller or airless paint sprayer
│ Drying time │ about half an hour outdoors, about 1 hour indoors
│Theoretical coating amount │80-90 m ^ 2 / 5 gallons. 1 road
│ Capacity │ 5 gallons
